Overview
This 5,000-count box of 1-inch 18-gauge galvanized brad nails is a direct aftermarket replacement for DEWALT DBN18100-2. The thin finish heads leave barely visible holes in trim and molding, while the galvanized coating provides rust resistance for indoor work and light exterior applications. A high-count box like this keeps professional trim crews and serious DIYers loaded up through entire room makeovers without mid-job restocking.
Key specifications
- Gauge: 18 GA
- Length: 1 in. (25 mm)
- Finish: Galvanized (zinc-coated)
- Head type: Thin finish head
- Quantity: 5,000 per box
- Collation: Straight strip
- Replaces OEM part: DBN18100-2, BT1309B-1M, 650215
Compatibility
Works with most 18-gauge brad nailers including DEWALT DCN680N, DCN680D1, DCN680B, DWFP12233; Milwaukee 2746-20, M12/M18 FUEL; RYOBI P320, P321, P322, P325, P330; RIDGID R213BNF, R09891B; Porter-Cable BN200CP; WORX WX842L, WX840L; Senco FinishPro 15; and Bauer 57180. Verify your nailer accepts 18 GA, 1-inch straight-strip brads.
Installation notes
Slide the nail strip into the magazine rail with the points facing the nose of the nailer and push the follower spring behind the strip. Before nailing finish surfaces, fire a few test shots into scrap material and adjust the depth dial so the thin head seats just below the surface. For painted trim, a light dab of wood filler over each nail hole gives a seamless finish; for stain-grade work, use a color-matched putty stick.
Common questions
Q: Will these 1” 18GA brad nails fit my DEWALT DCN680B and DWFP12233 nailers without jamming?
Yes, these are 18-gauge, 1-inch straight brad nails made for nailers that accept standard 18GA brads, including the DEWALT DCN680B and DWFP12233 models listed. As long as your magazine is set up for 18GA straight brads and the nails are loaded in the correct direction, they should feed properly like the original size specified for those tools.
Q: Are these DBN18100-2 replacement brads suitable for both pneumatic and electric 18-gauge nailers like the DCN680D1 and DWFP12233-10?
Yes, these nails are intended for compatible 18-gauge brad nailers in both cordless/electric and pneumatic versions, including the DCN680D1 and DWFP12233-10 listed in the product description. The key match points are the gauge and length, so if your nailer uses 1” 18GA straight brads, these are the correct type to use.
Q: Is there anything special I should do when loading these 5000pcs 1” brad nails to avoid feed problems in a DEWALT DCN680N?
Make sure the nail strip is seated fully in the magazine and that the pusher engages the strip evenly before closing the magazine. It also helps to keep the magazine clean of sawdust and debris, because buildup in the feed track is one of the most common causes of jams and misfires with 18-gauge brad nailers.
